To Next PageTo Next PageWhat to do if my Mitsubishi Electric MSZ-GL18NA-U1 Air Conditioner indoor control system is not reading data?
If the Mitsubishi Electric Air Conditioner's indoor control system cannot properly read data in the nonvolatile memory of the indoor electronic control P.C. board, you should replace the indoor electronic control P.C. board.
What to do if my Mitsubishi Electric MSZ-GL18NA-U1 Air Conditioner has other abnormality?
If your Mitsubishi Electric Air Conditioner shows other abnormality, check the stop valve, the 4-way valve and check the abnormality in detail using the failure mode recall function for outdoor unit.
General| Cooling Capacity | 18, 000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Voltage | 208 / 230 V |
| Operating Temperature (Cooling) | 14°F to 115°F |
| Power Supply | 1-phase, 60Hz |
Explains warning and caution symbols used to indicate potential hazards.
Defines graphical symbols that represent actions to take or avoid for safety.
Covers precautions related to power cords, outlets, and wiring to prevent shock.
Highlights critical safety aspects and unsuitable locations for installation.
Provides essential safety advice and cautions for installation procedures.
Illustrates recommended installation placements and distances for optimal performance.
Details requirements for dedicated power supply, circuits, and breaker capacity.
How to save and recall preferred temperature, fan speed, and airflow settings.
Energy-saving cooling mode that uses oscillating airflow.
General guidelines and precautions for cleaning the air conditioner unit.
Common problems related to the indoor unit and their explanations.
Common problems related to the outdoor unit and their explanations.
Lists critical issues that require professional service from a dealer.
