To Next PageTo Next PageWhat to do if the problem with my Mitsubishi Electric MXZ-3E68VA keeps happening?
If the issue with your Mitsubishi Electric Air Conditioner continues to happen, assess the situation and apply a fix as described in the "9-3. SELF-DIAGNOSIS ACTION TABLE".
What to do if the trouble is not reoccurring and is logged in Mitsubishi Electric MXZ-3E68VA Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring but is logged, consider temporary defects such as the operation of protection devices in the refrigerant circuit including the compressor, poor wiring connections, or noise. Re-check the symptom, and check the installation environment, refrigerant amount, weather when the trouble occurred, and matters related to wiring. After service, reset check code logs and restart the unit. Note that there may be no abnormality in the electrical components, controller board, remote controller, etc.
What to do if the trouble is not reoccurring and is not logged in Mitsubishi Electric MXZ-3E68VA Air Conditioner?
If the trouble with your Mitsubishi Electric Air Conditioner is not reoccurring and is not logged, re-check the abnormal symptom. Conduct troubleshooting and ascertain the cause of the trouble. If the cause is not ascertained, continue to operate the unit for the time being. Note that there may be no abnormality concerning parts such as electrical components, controller board, remote controller, etc.
General| Category | Air Conditioner |
|---|---|
| Cooling Capacity | 6.8 kW |
| Heating Capacity | 8.6 kW |
| Power Supply | 220-240 V, 50 Hz |
| Refrigerant | R410A |
| Energy Efficiency Cooling | A++ |
| Energy Efficiency Heating | A+ |
| Outdoor Unit Noise Level | 49 dB(A) |
| Maximum Number of Connectable Indoor Units | 3 |
| Type | Multi-Split System |
| Indoor Units Compatibility | M Series |
| Indoor Unit Dimensions (HxWxD) | Varies depending on the connected indoor unit model |
