This Installation Manual describes only for the outdoor unit and the connected
indoor unit of MSH series.
If the connected indoor unit is MSH, MSZ, MCFH, SLZ and SEZ series, refer to
the Installation Manual for MSH, MSZ, MCFH, SLZ and SEZ series for the
information other than outdoor unit.
INSTALLATION MANUAL
FOR INSTALLER
CONTENTS
1. THE FOLLOWING SHOULD ALWAYS BE OBSERVED FOR
SAFETY ........................................................................................... 2
2. INSTALLATION DIAGRAM & ACCESSORIES ................................ 2
3. SELECTING THE INSTALLATION LOCATION ............................... 3
4. OUTDOOR UNIT INSTALLATION ................................................... 4
5. INDOOR/OUTDOOR UNITS CONNECTION FINISHING AND
TEST RUN ....................................................................................... 6
SPLIT-TYPE AIR CONDITIONER
Model MXZ-A26/32WV
IMPORTANT NOTES
TO COMPLY WITH THE REQUIREMENTS OF AUSTRALIAN
STANDARD AS 3000 S.A.A. WIRING RULES, THE ELECTRICAL
WIRING REQUIRED BETWEEN THE INDOOR AND OUTDOOR
UNITS MUST BE INSTALLED BY A LICENCED ELECTRICAL
CONTRACTOR.
To Next Page
Need help?
General
