EasyManua.ls Logo

Mitsubishi Electric PAC-IF082B-E - 10.3 Electrical Connection

Mitsubishi Electric PAC-IF082B-E
64 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
53
10. Multiple outdoor units control
System 4: Heating/Cooling system (with Boiler)
• Install a mixing tank (local supply) for connection of the boiler.
• Install a low loss header (local supply).
• Install booster heater between low loss header and mixing tank.
• For more details, refer to the installation manual of PAC-TH012HT-E.
No.
Component
Wiring
Main Sub 1 Sub 2
1 Booster heater (local supply)
2 Circulation pump 1 (local supply)
3 Flow switch 1 or sensor *2
4 Circulation pump 2 (local supply)
5 Flow switch 2 (local supply) *2
6 Thermistor (Flow water temp.) (THW1)
7 Thermistor (Return water temp.) (THW2)
8
Thermistor (Zone 1 ow water temp.) (THW6) (option)
9
Thermistor (Zone 1 return water temp.) (THW7) (option)
10
Thermistor (Boiler ow water temp.) (THWB1) (option)
No.
Component
Wiring
Main Sub 1 Sub 2
11 Sub 1 circulation pump 1 (local supply)
12 Sub 1 ow switch or sensor *2
13 Sub 1 thermistor (Flow water temp.) (THW1)
14 Sub 1 thermistor (Return water temp.) (THW2)
15 Sub 1 thermistor (Ref. liquid temp.) (TH2) *1
16 Sub 2 circulation pump 1 (local supply)
17 Sub 2 ow switch or sensor *2
18 Sub 2 thermistor (Flow water temp.) (THW1)
19 Sub 2 thermistor (Return water temp.) (THW2)
20 Sub 2 thermistor (Ref. liquid temp.) (TH2) *1
*1 Cooling system is available only with ERS or ERP models.
*2 For safety protection, it is recommended to install.
No.
Component
Wiring
Main
Sub 1
(Hydrobox)
Sub 2
(Hydrobox)
1 Booster heater (local supply)
2 Circulation pump 1 (local supply)
3 Flow switch 1 or sensor *2
4
Thermistor (Flow water temp.) (THW1)
5
Thermistor (Return water temp.) (THW2)
<Fig. 10.2.6>
*1 When the outdoor unit is split type, TH2 needs to be installed. (Fig. 10.2.1)
*2 For safety protection, it is recommended to install.
System 5: Heating/Cooling system (with Hydrobox)*1
• Install a low loss header (local supply).
• Install booster heater toward the local system, relative to the low loss header.
4
5
21
3
Outdoor unit
Hydrobox
Heating/
Cooling
Outdoor unit
Hydrobox
Low loss header
(local supply)
en
6
13
14
15
20
7
8
9
10
4
5
2
11
1
3
12
18
19
1617
Outdoor unit
Heating/Cooling
Outdoor unit
Mixing tank
(local supply)
Boiler
Low loss header
(local supply)
<Fig. 10.2.7>

Related product manuals