Why does warm air not blow from the Mitsubishi Electric Air Conditioner indoor unit immediately when heating operation starts?
Warm air does not blow from the Mitsubishi Electric Air Conditioner until the indoor unit has sufficiently warmed up.
Why does my Mitsubishi Electric PEAD-RP125 Air Conditioner stop before reaching the set temperature in heating mode?
When the outdoor temperature is low and the humidity is high, frost may form on the outdoor unit of your Mitsubishi Electric Air Conditioner. If this occurs, the outdoor unit performs a de-frosting operation, and normal operation should begin after approximately 10 minutes.
Why does the Mitsubishi Electric Air Conditioner vane move past the set position?
When the airflow direction is changed, the vanes move to the set position after detecting the base position.
Why does my Mitsubishi Electric PEAD-RP125 make draining water or motor rotation sounds?
When cooling operation stops, the drain pump operates and then stops. Wait approximately 3 minutes.
Why does “PLEASE WAIT” appear in the Mitsubishi Electric PEAD-RP125 remote controller display?
The initial settings are being performed. Wait approximately 3 minutes.
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PEAD-RP125 |
| Category | Air Conditioner |
| Language | English |
Explains symbols used in text and illustrations for warnings and cautions.
Covers safety during the installation process, including unit placement and connections.
Covers safety during normal unit operation and potential failures.
Guidance for storing the unit long-term and proper disposal.
Lists parts of the indoor unit.
Visual diagrams of the indoor and ceiling concealed units.
Details the display section of the wired remote controller.
Identifies the buttons and their functions on the remote controller.
Explains messages like 'PLEASE WAIT' and 'NOT AVAILABLE'.
Details the buttons and functions of the wireless remote controller.
Steps for battery installation and replacement in the remote controller.
Explains different screen types available on the remote.
Instructions on how to navigate between different screen displays.
Note about the time/day display dependency on clock setting.
Instructions on how to start and stop the air conditioner unit.
Note about initial settings upon unit restart.
Covers starting, stopping, and selecting operational modes.
Details temperature and fan speed adjustment.
Describes how automatic mode switches between cooling and heating.
Explains how actual fan speed may differ from display.
Details how to operate the ventilator with the wired remote.
Details ventilator operation with the wireless remote.
Introduces timer functions available with the wired remote.
Explains how to set up a weekly timer for automated operations.
Step-by-step guide to setting the weekly timer.
Notes on timer function limitations and conditions.
Explains setting up simple and auto off timers with guides.
Notes on simple and auto off timer limitations and conditions.
Instructions for viewing, turning off, and turning on the auto off timer.
Instructions for setting timers using the wireless remote controller.
Steps to set the current time on the wireless remote controller.
Instructions for viewing and turning simple timer on/off.
How to lock/unlock remote controller buttons to limit functions.
Step-by-step instructions for locking and unlocking remote buttons.
Explains how to interpret error codes displayed by the unit.
Detailed explanation of error codes and their meanings.
Overview of how to change remote controller functions.
Lists functions like language, limits, modes, and display settings.
Flowchart showing how to access and change function settings.
How to change display language and set operation lock.
Settings for controller role, clock function, and mode selection.
Settings for temperature units and auto mode display.
Detailed explanation of function selection items.
Detailed steps to change the display language.
Details on operation lock, auto mode, and mode selection.
Settings for temperature units, room temp display, and auto mode display.
Table showing function settings across different languages.
Details on operation lock and automatic mode settings.
Settings for remote controller role, clock use, and timer type.
Settings for temperature units and auto mode display.
How to perform emergency operation when the wireless remote is not working.
Explanation of the ON/OFF lamp status indicator.
Instructions for cleaning filters, filter removal precautions, and cleaning cautions.
Diagram showing filter locations and knob on the unit.
Solutions for heating/cooling problems, and abnormal operation sounds.
Explanations for mist/vapor, odors, and unexpected fan speed changes.
Solutions for blank remote displays and 'PLEASE WAIT' messages.
Solutions for timer setting issues and draining water sounds.
Solutions for excessive noise levels from the unit.
Solutions for wireless remote display or signal issues.
Solutions when the indoor unit's operation lamp blinks.
To Next Page
