To Next PageTo Next Page
Need help?Do you have a question about the Mitsubishi Electric PEH-5 and is the answer not in the manual?
General| Brand | Mitsubishi Electric |
|---|---|
| Model | PEH-5 |
| Category | Air Conditioner |
| Language | English |
Information on safe and correct installation procedures, user responsibilities, and authorized installers.
Guidance on stable surface installation, avoiding snow, leaves, rubbish, and noise disturbance.
Ensuring the indoor unit is securely mounted to prevent falling and injury.
Advice on placing the remote controller where children cannot access it.
Ensuring smooth drainage to prevent water leakage and furniture damage.
Guidance on dedicated lines, main switches, voltage, and fuse/breaker ratings.
Instructions for proper grounding to prevent electric shock and connection points.
Guidelines for safe operation, including remote controller usage and avoiding hazards.
Advice on actions to take if the unit shows errors or abnormal behavior.
Instructions for preparing the unit for extended periods of non-use to prevent mold and waste.
Guidance on contacting dealers for proper disposal to avoid refrigerant release and environmental damage.
Description of air inlet, filter (optional), and air outlet for the indoor unit.
Introduction to the LCD remote controller and its variations.
Identification and function of each button on the remote controller.
Explanation of various symbols and indicators shown on the remote controller screen.
Instructions for starting and stopping the air conditioner operation using the ON/OFF button.
Guide on how to select between cooling (COOL) and fan (FAN) modes.
Instructions for adjusting the desired room temperature using the up/down buttons.
How to adjust fan speed using the remote controller, with model-specific displays.
Procedure to set the current day of the week and time on the remote controller.
Detailed steps to set up to eight operations per day for a weekly schedule.
Instructions on how to review programmed weekly timer settings.
Procedure to disable the weekly timer function.
Procedure to enable the weekly timer function.
Guide on setting a timer for a single start or stop event within a 72-hour period.
How to check the currently set simple timer values.
Procedure to deactivate the simple timer.
Procedure to activate the simple timer.
Instructions for setting a timer to automatically turn off the unit after a specified duration.
How to view the currently configured auto off timer settings.
Procedure to disable the auto off timer.
Procedure to activate the auto off timer.
How to lock all or select buttons to prevent unintended operation.
Step-by-step guide to engage the button lock feature.
Step-by-step guide to disengage the button lock feature.
Explanation of the indicator showing central control operation and restrictions.
Meaning of the flashing mode indicator for multi-unit operation or central control.
Indication that the filter needs cleaning and how to reset the display.
How to interpret and respond to error codes displayed on the remote controller.
Guidance on setting the optimal temperature difference for cooling and energy saving.
Importance of cleaning the optional air filter and its impact on performance.
Step-by-step instructions for cleaning the air filter, including cautions.
Tips to block sunlight and minimize heat entry during cooling operations.
Advice on regular room ventilation, especially when using gas appliances.
Instructions on how to remove and replace the air filter.
Solutions for common problems like poor cooling, noises, odors, and indicator issues.
Troubleshooting for unexpected startup, shutdown, or delayed operation.
Addressing issues with remote controller display, errors, and self-diagnostics.
Conditions requiring immediate dealer contact, such as flashing lights or water leaks.
Explanation of sounds and odors that are not indicative of a malfunction.
Advice on choosing suitable installation sites, avoiding hazards like flammable gas.
Instructions for qualified electricians, grounding, and circuit breakers.
Guidance on consulting dealers for cost and safety during installation transfer.
Tips for minimizing noise and vibration during installation.
Importance of regular maintenance to prevent performance degradation and foul odors.
