EasyManua.ls Logo

Mitsubishi Electric PFD-P250VM-E - User Manual

Mitsubishi Electric PFD-P250VM-E
13 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Air-Conditioners
INDOOR UNIT
PFD-P250
500VM-E
OPERATION MANUAL
For safe and correct use, please read this operation manual thoroughly before operating the air-conditioner unit.
BEDIENUNGSHANDBUCH
Zum sicheren und einwandfreien Gebrauch der Klimaanlage dieses Bedienungshandbuch vor Inbetriebnahme gründlich durchlesen.
MANUEL D’UTILISATION
Pour une utilisation correcte sans risques, veuillez lire le manuel d’utilisation en entier avant de vous servir du climatiseur.
MANUAL DE INSTRUCCIONES
Lea este manual de instrucciones hasta el final antes de poner en marcha la unidad de aire acondicionado para garantizar un uso seguro
y correcto.
ISTRUZIONI DI FUNZIONAMENTO
Leggere attentamente questi istruzioni di funzionamento prima di avviare l’unità, per un uso corretto e sicuro della stessa.
BEDIENINGSHANDLEIDING
Voor een veilig en juist gebruik moet u deze bedieningshandleiding grondig doorlezen voordat u de airconditioner gebruikt.
РУКОВОДСТВО ПО ЭКСПЛУАТАЦИИ
Для обеспечения п авильного и безопасного использования следует ознакомиться с инст укциями, указанными в данном
уководстве по эксплуатации, тщательным об азом до того, как п иступать к использованию кондиционе а.
GB
D
F
I
NL
E
RU
GR
RU
TR

Other manuals for Mitsubishi Electric PFD-P250VM-E

Questions and Answers

  • E
    Erica DuarteAug 9, 2025
    Why is my Mitsubishi Electric PFD-P250VM-E not cooling enough?
    • J
      Joshua RayAug 9, 2025
      If the Mitsubishi Electric Air Conditioner is not cooling enough, it might be due to several reasons. First, check if the temperature is set correctly. Then, make sure the air filters are clean. Obstacles blocking the air inlet and outlet of the indoor and outdoor units can also cause this issue, so remove any obstructions. Finally, ensure that windows and doors are closed to maintain the cooling efficiency.
  • S
    Stephanie CurryAug 14, 2025
    Why Mitsubishi Electric PFD-P250VM-E Air Conditioner air flows out but it does not cool enough?
    • A
      alyssawallaceAug 14, 2025
      There are several reasons why your Mitsubishi Electric Air Conditioner might not be cooling sufficiently: * The temperature setting may be improperly adjusted. Check the set temperature and inlet temperature on the display and adjust as needed. * The air filter might be clogged with dust and dirt. Clean the filter to ensure proper airflow. * Obstructions at the air inlet or outlet of either the indoor or outdoor units can restrict airflow. Remove any obstacles. * Open windows and doors can let warm air in, reducing the cooling efficiency. Ensure windows and doors are closed.
  • M
    Mark BoothAug 19, 2025
    What to do if Mitsubishi Electric Air Conditioner does not run?
    • S
      Sonya SimmonsAug 19, 2025
      If your Mitsubishi Electric Air Conditioner does not run, there are several potential causes. First, check for a power failure; if there was one, press the [ON/OFF] button after power is restored. Ensure that the main power supply is turned ON. Also, inspect the fuse in the power supply and replace it if it's gone. Finally, check the earth leakage breaker and put it in if it has tripped.
  • T
    Tony MorrisonAug 25, 2025
    Why does my Mitsubishi Electric Air Conditioner run briefly, but soon stops?
    • J
      Jonathan ToddAug 25, 2025
      If your Mitsubishi Electric Air Conditioner runs briefly and then stops, it could be due to obstructions at the air inlet or outlet of the indoor and outdoor units; rerun the unit after removing any obstacles. Additionally, a dirty air filter can cause this issue; rerun the unit after cleaning the filter.
  • P
    Paul MartinAug 29, 2025
    What to do if my Mitsubishi Electric Air Conditioner does not run?
    • B
      bsanchezAug 29, 2025
      If your Mitsubishi Electric Air Conditioner isn't running, consider these potential causes: * There may have been a power failure. If so, press the [ON/OFF] button to restart the unit after power is restored. * The main power supply to the unit might be turned off. Turn the power supply ON. * A blown fuse in the power supply could be the issue. Replace the fuse. * The earth leakage breaker might have tripped. Reset the earth leakage breaker.
  • S
    Stephanie SmithSep 3, 2025
    What to do if Mitsubishi Electric PFD-P250VM-E Air Conditioner runs briefly, but soon stops?
    • M
      markmurphySep 3, 2025
      If your Mitsubishi Electric Air Conditioner starts but stops shortly after, the following could be the reasons: * Obstructions may be present at the air inlet or outlet of the indoor and outdoor units. Remove any obstacles and rerun the system. * The air filter might be clogged with dust and dirt. Clean the filter before rerunning the air conditioner.

Mitsubishi Electric PFD-P250VM-E Specifications

General IconGeneral
ModelPFD-P250VM-E
Cooling Capacity25.0 kW
Heating Capacity28.0 kW
RefrigerantR410A
Power Supply380-415V, 3Ph, 50Hz

Related product manuals