To Next PageTo Next PageWhat does blank symbol mean on Mitsubishi Electric PLA-A EA Heat Pump remote?
If “ ” appears in the remote controller display of your Mitsubishi Electric Heat Pump, during central control, air conditioner operation cannot be started or stopped using the remote controller.
What to do if Mitsubishi Electric PLA-A EA Heat Pump won't restart immediately?
If your Mitsubishi Electric Heat Pump does not operate even though the ON/OFF button is pressed soon after stopping it, wait approximately three minutes. Operation has stopped to protect the air conditioner.
Why does Mitsubishi Electric PLA-A EA turn on by itself?
If your Mitsubishi Electric Heat Pump operates without the ON/OFF button being pressed, check if the on timer is set and press the ON/OFF button to stop operation. Also, check if the air conditioner is connected to a central remote controller and consult the concerned people who control the air conditioner. Check if “ ” appears in the remote controller display and consult the concerned people who control the air conditioner. Finally, check if the auto recovery feature from power failures has been set and press the ON/OFF button to stop operation.
General| Series | PLA-A EA Series |
|---|---|
| Type | Heat Pump |
| Refrigerant | Data not available |
| Heating Capacity | Varies by model, see official documentation |
| Cooling Capacity | Varies by model, see official documentation |
| Power Supply | Varies by model, see official documentation |
| Energy Efficiency Ratio (EER) | Varies by model, see official documentation |
| Coefficient of Performance (COP) | Varies by model, see official documentation |
| Operating Temperature Range (Heating) | Varies by model, see official documentation |
| Operating Temperature Range (Cooling) | Varies by model, see official documentation |
| Noise Level | Varies by model, see official documentation |
| Dimensions (Indoor Unit) | Varies by model, see official documentation |
| Weight (Indoor Unit) | Varies by model, see official documentation |
| Dimensions (Outdoor Unit) | Varies by model, see official documentation |
| Weight (Outdoor Unit) | Varies by model, see official documentation |
Explains warning, caution, and illustration symbols used in the manual for safe operation.
Provides instructions on how to properly dispose of the air conditioning unit.
Details the various parts of the indoor unit of the air conditioner.
Lists and describes optional remote controller types, including wired and wireless.
Explains the layout and functions of the wired remote controller's display and buttons.
Describes the comprehensive and simplified display modes of the remote controller.
Details the display, indicators, and main buttons of the wireless remote controller.
Explains operation mode, temperature, vane, fan speed, and sensor settings on the wireless remote.
Provides step-by-step instructions for installing or replacing batteries in the wireless remote controller.
Instructions on how to start and stop the air conditioner using the ON/OFF button.
Guide on choosing between Cool, Drying, Fan, Auto, and Heat operation modes.
Instructions on adjusting the desired temperature for different operation modes.
Explains how to change the fan speed settings for optimal airflow.
Details how to navigate menus to adjust vane and louver direction settings.
Describes how to set specific vane angles and ventilation airflow for the unit.
Explains how to fix the vertical airflow direction for specific outlets.
Guides users through setting individual vane angles for specific outlets and units.
Outlines available vane angle settings, including step angles and draft reduction.
Explains how to set up and use the 3D i-see sensor for intelligent air distribution.
Details how to configure air distribution based on detected occupancy and room conditions.
Describes how to set direct or indirect airflow for energy saving based on occupancy.
Explains different energy-saving modes like No Occupancy and Room Occupancy, including Auto-OFF.
Details the seasonal airflow feature that adjusts vane direction based on mode and temperature.
Explains how to operate the ventilation system in conjunction with the indoor unit.
Provides instructions on cleaning air filters and resetting the filter indicator.
Information for US residents regarding product warranty registration and contact details.
Information for Canadian residents on HVAC warranty registration and contact details.
