Need help?Do you have a question about the Mitsubishi Electric PURY-P144TJMU-A and is the answer not in the manual?
General| Cooling Capacity | 14.0 kW |
|---|---|
| Heating Capacity | 16.0 kW |
| Voltage (V) | 380-415V |
| Phase | 3 |
| Refrigerant | R410A |
| Noise Level (Outdoor Unit) | 54 dB(A) |
| Cooling Capacity (BTU/h) | 47700 BTU/h |
| Heating Capacity (BTU/h) | 54, 600 BTU/h |
| Energy Efficiency Ratio (EER) | 3.50 |
| Power Supply | 3-Phase |
| Indoor Unit Type | Compatible with various indoor units |
| Outdoor Unit Type | Outdoor Unit |
| Operating Temperature (Cooling) | -5°C to 46°C |
Important instructions to avoid injury, death, or unit damage, including installation warnings.
Specific handling guidelines for R410A refrigerant, including piping.
Advice on unit placement, environmental considerations, and electrical work.
Essential steps to perform before initiating the test run.
Rules on compatible units, system setup, and controller connections.
Lists essential checks, procedures, and operating data for test runs.
Comprehensive list of error codes and how to interpret them on the remote controller.
Detailed troubleshooting steps for specific components like sensors, valves, and boards.
Procedures for identifying refrigerant leaks and replacing the compressor.
To Next Page