Mitsubishi Electric QY10 - User Manual

I/O Module Type Building Block
User's Manual
QX10 QY10
QX10-TS QY10-TS
QX28 QY18A
QX40 QY22
QX40-S1 QY40P
QX40-TS QY40P-TS
QX40H QY41H
QX41 QY41P
QX41-S1 QY42P
QX41-S2 QY50
QX42 QY68A
QX42-S1 QY70
QX50 QY71
QX70 QY80
QX70H QY80-TS
QX71 QY81P
QX72 QY82P
QX80 QH42P
QX80-TS QX41Y41P
QX80H QX48Y57
QX81 QI60
QX81-S2
QX82
QX82-S1
QX90H

Summary

SAFETY PRECAUTIONS

Design Precautions

Safety precautions related to the design and configuration of the system to prevent accidents.

Installation Precautions

Precautions for installing modules, including handling and mounting procedures to prevent damage.

Wiring Precautions

Precautions for wiring the modules, covering safe connection practices and noise prevention.

Startup and Maintenance Precautions

Precautions for starting up and maintaining the product, including handling and checks.

CONDITIONS OF USE FOR THE PRODUCT

1. GENERAL SPECIFICATIONS AND PRECAUTIONS FOR USE

1.2 Precautions for Use

General precautions to be observed when using I/O modules.

1.2.1 Input module

Precautions specific to DC input modules, including simultaneous ON points and response time.

1.2.2 Output module

Precautions for output modules, covering switching frequency, load connection, and fuses.

1.2.3 I;O combined module

Details on I/O numbers for combined modules and configuration when using them.

1.2.4 I;O module with protection function

Explanation of overload and overheat protection functions in specific I/O modules.

1.2.5 Interrupt module

Specifies conditions for interrupt input operation with specific modules and GX Developer.

1.2.6 Installation and wiring

Guidelines for installation and wiring, including wire types and screw tightening torque.

1.3 Various Settings for I;O Module

Describes various settings for I/O modules using GX Developer.

1.3.1 Setting of I;O response time

How to set the I/O response time for input and I/O mix modules using GX Developer.

1.3.2 Setting of error-time output mode

How to set the error-time output mode (Clear or Hold) for output or I/O mix modules.

1.3.3 Switch setting of interrupt module

Procedure for setting interrupt processing conditions (leading/trailing edge) for interrupt modules.

2. INPUT MODULE SPECIFICATIONS

2.1 QX10 AC Input Module

Specifications and external connection diagram for the QX10 AC Input Module.

2.2 QX10-TS AC Input Module

Specifications and external connection for the QX10-TS AC Input Module with spring clamp terminals.

2.3 QX28 AC Input Module

2.4 QX40 DC Input Module (Positive Common Type)

2.5 QX40-S1 DC Input Module (Positive Common Type)

2.6 QX40-TS DC Input Module (Positive Common Type)

2.7 QX40 H DC High-Speed Input Module (Positive Common Type)

Specifications for the QX40H High-Speed Input Module, including response time and function settings.

2.8 QX41 DC Input Module (Positive Common Type)

2.9 QX41-S1 DC Input Module (Positive Common Type)

2.10 QX41-S2 DC Input Module (Positive Common Type)

2.11 QX42 DC Input Module (Positive Common Type)

2.12 QX42-S1 DC Input Module (Positive Common Type)

2.13 QX50 DC (Positive Common;Negative Common Shared Type); AC Input Module

2.14 QX70 DC Input Module (Positive;Negative Common Shared Type)

2.15 QX70 H DC High-speed Input Module (Positive Common Type)

Specifications for the QX70H High-speed Input Module, including noise immunity and function settings.

2.16 QX71 DC Input Module (Positive;Negative Shared Common Type)

2.17 QX72 DC Input Module (Positive;Negative Shared Common Type)

2.18 QX80 DC Input Module (Negative Common Type)

2.19 QX80-TS DC Input Module (Negative Common Type)

2.20 QX80 H DC High-speed Input Module (Negative Common Type)

Specifications for the QX80H High-speed Input Module, including response time and function settings.

2.21 QX81 DC Input Module (Negative Common Type)

2.22 QX81-S2 DC Input Module (Negative Common Type)

2.23 QX82 DC Input Module (Negative Common Type)

2.24 QX82-S1 DC Input Module (Negative Common Type)

2.25 QX90 H DC High-speed Input Module (Negative Common Type)

Specifications for the QX90H High-speed Input Module, including noise immunity and function settings.

3. OUTPUT MODULE SPECIFICATIONS

3.1 QY10 Contact Output Module

3.2 QY10-TS Contact Output Module

3.3 QY18 A Contact Output Module (All Points Independent)

3.4 QY22 TRIAC Output Module

3.5 QY40 P Transistor Output Module (Sink Type)

3.6 QY40 P-TS Transistor Output Module (Sink Type)

3.7 QY41 H Transistor High-speed Output Module (Sink Type)

Specifications for the QY41H Transistor High-speed Output Module (Sink Type).

3.8 QY41 P Transistor Output Module (Sink Type)

3.9 QY42 P Transistor Output Module (Sink Type)

3.10 QY50 Transistor Output Module (Sink Type)

3.11 QY68 A Transistor Output Module (All Points Independent, Sink;Source Type)

3.12 QY70 Transistor Output Module (Sink Type)

3.13 QY71 Transistor Output Module (Sink Type)

3.14 QY80 Transistor Output Module (Source Type)

3.15 QY80-TS Transistor Output Module (Source Type)

3.16 QY81 P Transistor Output Module (Source Type)

3.17 QY82 P Transistor Output Module (Source Type)

4. I;O COMBINED MODULE

4.1 QH42 P I;O Combined Module

4.2 QX41 Y41 P I;O Combined Module

4.3 QX48 Y57 I;O Combined Module

5. INTERRUPT MODULE

5.1 QI60 Interrupt Module

7. CONNECTORS

8. SPECIFICATIONS OF CONNECTOR;TERMINAL BLOCK CONVERTER MODULES

9. SPRING CLAMP TERMINAL BLOCK

10. PART NAMES

11. I;O MODULE TROUBLESHOOTING

11.1 Input Circuit Troubleshooting

Identifies common input circuit problems and provides corrective actions.

11.2 Output Circuit Troubleshooting

Identifies common output circuit problems and provides corrective actions.

Mitsubishi Electric QY10 Specifications