24
5 SYSTEM CONFIGURATION
5.3 Available Software Packages
5.3 Available Software Packages
GX Works3 and GX Configurator-PN are required for configuring the settings of the RJ71PN92.
Profile of the RJ71PN92
The profile is data stored the information (such as a model name) of connected devices.
Profile of the RJ71PN92 are automatically registered in GX Works3 during the installation of GX Configurator-PN.
If GX Works3 is installed on the condition that GX Configurator-PN is already installed, the RJ71PN92 cannot
be added in GX Works3.
Install each software in order of GX Works3 GX Configurator-PN.
Software Supported version
GX Works3 Version 1.032J or later
GX Configurator-PN Version 2.00A or later
To Next Page
Loading...
