To Next PageTo Next PageWhat does it mean when water or vapor is emitted from my Mitsubishi Electric SLZ-KF25VA Air Conditioner outdoor unit?
During cooling mode, water may form and drip from the cool pipes and joints of your Mitsubishi Electric Air Conditioner. In heating mode, water may form and drip from the heat exchanger. Water vapor may also be emitted during defrosting mode as water on the heat exchanger evaporates.
Why won't my Mitsubishi Electric SLZ-KF25VA operate right after I stopped it?
If you try to restart your Mitsubishi Electric Air Conditioner immediately after stopping it and it doesn't respond, wait approximately three minutes. This delay protects the unit.
Why can't I set the timer on my Mitsubishi Electric SLZ-KF25VA Air Conditioner's remote controller?
Check if the timer settings on your Mitsubishi Electric Air Conditioner's remote controller are invalid. If the timer can be set, a specific symbol will appear on the remote controller display.
Why won't warm air blow from my Mitsubishi Electric SLZ-KF25VA indoor unit right after starting heating operation?
Warm air will not blow from the indoor unit of your Mitsubishi Electric Air Conditioner until it has sufficiently warmed up.
Why does my Mitsubishi Electric SLZ-KF25VA Air Conditioner keep stopping before reaching set temperature in heating mode?
If your Mitsubishi Electric Air Conditioner stops before reaching the set temperature during heating mode, it may be due to frost forming on the outdoor unit when the outdoor temperature is low and the humidity is high. The unit will perform a defrosting operation, and normal operation should resume after approximately 10 minutes.
Why does my Mitsubishi Electric Air Conditioner stop without pressing the ON/OFF button?
If your Mitsubishi Electric Air Conditioner stops unexpectedly, first check if the off timer is set. If it is, press the ON/OFF button to restart operation. Also, if the air conditioner is connected to a central remote controller or if a specific symbol appears on the remote controller, consult the relevant personnel who manage the air conditioner.
What to do if my Mitsubishi Electric Air Conditioner operates without pressing the ON/OFF button?
If your Mitsubishi Electric Air Conditioner starts on its own, check if the on timer is set and, if so, press the ON/OFF button to stop operation. Also, check if the auto recovery feature from power failures has been set and, if so, press the ON/OFF button to stop operation. If the air conditioner is connected to a central remote controller or if a specific symbol appears on the remote controller, consult the relevant personnel who manage the air conditioner.
What to do if I see an error code on my Mitsubishi Electric SLZ-KF25VA Air Conditioner remote controller?
If an error code appears on your Mitsubishi Electric Air Conditioner's remote controller display, the protection devices have likely activated to safeguard the unit. Immediately turn off the power and consult your dealer, providing them with the model name and the error code displayed.
General| Type | Ceiling cassette |
|---|---|
| Cooling Capacity | 2.5 kW |
| Heating Capacity | 3.2 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Outdoor Unit Weight | 35 kg |
| Outdoor Unit Noise Level | 50 dB(A) |
Explains how to turn the air conditioner unit ON and OFF using the remote controller.
Describes how to select different operation modes like Cool, Dry, Fan, Auto, and Heat.
Details how to adjust the temperature for cooling, drying, heating, and auto modes.
Explains how to configure the 3D i-See sensor for air distribution and energy saving.
Lists common problems like poor cooling/heating, noise, and error displays with solutions.
Lists technical details like power supply, dimensions, airflow, noise levels, and operating ranges.
