Mitsubishi Electric TC-24B - Group Icon Settings

42 43
Usage - Main Menu settings - Operation setting Usage - Main Menu settings - Operation setting
3
To make Group icon settings
Main Menu > Operation Setting
1
2
3
Main Menu > Operation Setting > Group Icon Setting
Touch the
3
[Group Icon Setting] button on the [Operation Setting] screen.
Group icon setting 1
Stops or starts the operation of the specific group of
units when the group icon is touched.
Group icon setting 2 (default)
Allows the user to select multiple groups before jumping
to the GROUP screen. Touch the [Operate] button after
selecting groups to jump to the GROUP screen.
Group icon setting 3
Jumps to the GROUP screen when a group icon is
touched.
1
2
1. Select among Group icon setting 1, Group icon setting 2, and Group icon setting 3 by touching the
corresponding button labeled 1 .
2. Touch the
2 [Save] button.
To select the groups on which to execute the Hold function
1. Touch the B [Hold] button on the [Collective
Operation Setting] screen.
2. Read the pop-up message, and touch the [OK]
button to confirm.
3. Select the groups to include from the group icons
labeled
1. By default, all groups are selected.
4. Touch the
2 [Save] button.
To select the groups on which to execute the Collective ON/OFF function
1. Touch the C [ON/OFF] button on the [Collective
Operation Setting] screen.
2. Read the pop-up message, and touch the [OK]
button to confirm.
3. Select the groups to include from the group icons
labeled
1. By default, all groups are selected.
4. Touch the
2 [Save] button.
• The DIDO controller groups that do not support the Collective ON/OFF function cannot be selected.
1
2
Select All button
Selects all groups.
Show Group Name List button
Shows a list of group names in a pop-up
window.
1
2
Select All button
Selects all groups.
Show Group Name List button
Shows a list of group names in a pop-up
window.