'14 • PAC-SM-215
E11
Address setting error of
indoor units
Keeps flashing
Keeps flashing
Keeps flashing
stays OFF
1. Applicable model
5. Troubleshooting
All models
Diagnosis Countermeasure
• In cases of RC-E5
Return address No. to
“IU …” using [
▲
] or
[
▲
] button.
• In cases of RC-EX1A
Menu
➞
Next
➞
IU settings
➞
Select IU
2. Error detection method
IU address has been set using
the “Master IU address set”
function of remote control.
3.
Condition of Error displayed
Same as above
4. Presumable cause
Same as above
Note:
Is “Master IU
address set” function of remote
control used?
E11 occurs
YES
IU IU IU
R/C
In case the wiring is below and “Master IU address set”
is used, E11 is appeared.
Error code
Remote control:
LED Green Red
Indoor
Outdoor
Content
-
83
-
To Next Page
Loading...
Need help?
General
