−41−−40−
1
Tap the
Menu
button on the TOP screen and select
User setting
⇒
Initial settings
⇒
Summer time
.
2
The Summer time setting screen is displayed.
Changing from
Disable
to
Enable
…
(Current time + 1 hr) is displayed.
Changing from
Enable
to
Disable
…
(Current time – 1 hr) is displayed.
■Summer time
You can adjust the current time by one hour.
Summer time
Enable
Disable
Back
Select the item.
2
The Contrast Adjustment screen is
displayed.
Tap the “Contrast” on the Initial settings
menu screen. The contrast on the
screen changes by tapping the
Dark
or
Bright
button to select a
desired contrast.
3
Tap the
Set
button after the
setting.
4
T
ap the
Adjust button to
display the Upper/Lower Contrast
screen.
5
The contrast of the lower half of the
screen changes when you tap the
Dark
/
Bright
button. Adjust the
contrast so that the upper and lower
halves of the screen match.
6
After you make the settings, tap the
Set
button.
[When the contrast differs between the top and bottom of the screen]
■Contrast
You can adjust the contrast of the LCD.
1
Tap the
Menu
button on the TOP screen and select
User setting
⇒
Initial settings
⇒
Contrast
.
Contrast
Back
Set
Adjust
Dark
Bright
Upper/Lower Contrast
Back
Set
Adjust contrast between upper and lower.
Dark
Bright
1
Tap the
Menu
button on the TOP screen and select
User setting
⇒
Initial settings
⇒
Backlight
.
3
Tap the
Set button after the setting.
2
The Backlight setting screen is displayed.
Tap the ON or OFF buttons for the backlight lighting and the lighting Period (5 - 90 sec, at 5-sec intervals).
ON
…
The “Backlight” lights when the LCD is tapped.
If no operation is made for the set time, it turns off automatically.
OFF
…
The “backlight” does not light even if the LCD is tapped.
■Backlight
You can turn ON/OFF the backlight and set the lighting period.
Backlight
Back
Select the item.
Set
OFF
ON
Seconds
1
Tap the
Menu
button on the TOP screen and select
User setting
⇒
Initial settings
⇒
Date & time display
.
2
The Clock setting screen is displayed.
Tap
OFF
/
ON
for the Date and time.
Tap
OFF
/
ON
for A day of the week.
Tap Display method “12H or 24H”.
12H
Hours …
If it is 3:50 PM, it displays “3:50PM”.
24H
Hours …
If it is 3:50 PM, it displays “15:50”.
Set the position of
AM/PM.
Set
Infront
... “PM3:50” is displayed.
Set
Back
... “3:50PM” is displayed.
3
Tap the
Set
button after the setting.
■Date & time display
You can set and correct the date & time display.
Date & time display
Set Back
Select setting
Infront
Position of AM / PM
12HDisplay method
ONA day of the week
ONDate & time
Back
24H
OFF
OFF
PJZ012A180_EN.indd 40 2019/03/29 11:33:37
To Next Page
Loading...
Need help?
General
