Mitsubishi Heavy Industries SC-SL4-AE User Manual (English)

Other manuals for Mitsubishi Heavy Industries SC-SL4-AE

User Manual81 pages

Installation Manual7 pages

Questions and Answers:

S
Steven BrownSep 14, 2025
Why doesn't Individual Lock/Unlock work on Mitsubishi Heavy Industries SC-SL4-AE Control Systems?
- G
  Gregory WrightSep 14, 2025
  If, when you select “Valid” for the Individual Lock/Unlock on the Function Setting screen, the function of permitting and prohibiting the individual operation of the remote controller does not work on your Mitsubishi Heavy Industries Control Systems, ensure that you select 'Invalid' for the Individual Lock/Unlock on the FUNCTION SETTING screen. This function applies to indoor units model KXE4 or later, and remote controller model RC-E1 or later.
C
courtneyzhangAug 25, 2025
What to do if a connection error occurs with Mitsubishi Heavy Industries Remote Control?
- E
  Elizabeth ClementsAug 25, 2025
  If a connection error occurs, first check that the entered address is correct. If it is, click the “Refresh” button in Internet Explorer. If the problem persists, restart Internet Explorer.
U
upattersonAug 25, 2025
Why does Mitsubishi Heavy Industries Remote Control monitoring PC freeze every few months?
- K
  karenpetersAug 26, 2025
  If the monitoring PC freezes every few months, restart Internet Explorer regularly. Additionally, if you're using Windows Vista, ensure it's Service Pack 1 (SP1) or later. If it's an earlier version, upgrade to SP1 or later.
B
Brian DixonAug 27, 2025
What to do if on-screen operation goes smoothly, but the actual Mitsubishi Heavy Industries Remote Control air conditioner does not operate?
- K
  Kimberly ArcherAug 27, 2025
  If the on-screen operation appears normal but the air conditioner isn't responding, check whether you are operating in virtual mode. Also, verify the setting in the SL4 central control.
M
Michael McleanAug 27, 2025
Why temperature settings (10 deg. C to 17.5 deg. C and 30.5 deg. C to 35 deg. C) cannot be changed on Mitsubishi Heavy Industries Remote Control?
- A
  Anthony DavisAug 27, 2025
  Some air conditioner models may not allow changes to these temperature settings. Contact your dealer for advice.
T
Tiffany SuttonSep 13, 2025
Why doesn't scheduled operation work on Mitsubishi Heavy Industries SC-SL4-AE?
- N
  Nichole ColemanSep 13, 2025
  If scheduled operation does not work on your Mitsubishi Heavy Industries Control Systems, check whether the schedule settings (Today's schedule and detailed daily schedule) are configured correctly.
R
Rita WilliamsSep 12, 2025
Why does the room temperature display show “--” on my Mitsubishi Heavy Industries SC-SL4-AE Control Systems?
- D
  Danielle ConnerSep 12, 2025
  If the room temperature display on your Mitsubishi Heavy Industries Control Systems remains at “--”, it indicates that the room temperature is 0°C or less. If this differs from the remote controller's display, contact your dealer.
M
Michaela HenrySep 12, 2025
Why are the calculating results not accurate on Mitsubishi Heavy Industries SC-SL4-AE Control Systems?
- R
  Renee McdonaldSep 12, 2025
  If the calculating results are not accurate on your Mitsubishi Heavy Industries Control Systems (SC-SL4-BE only), it may be because the total operating time in a day is less than 30 minutes, meaning there has been no operation for calculating purposes. Therefore, the calculating results may be slightly low.
K
keithswansonSep 4, 2025
What does it mean if the “Each group status display” is yellow on Mitsubishi Heavy Industries SC-SL4-AE Control Systems?
- L
  laurenesparzaSep 4, 2025
  If the “Each group status display” is displayed in yellow on your Mitsubishi Heavy Industries Control Systems, it indicates a communication problem. Contact your dealer, and be ready to provide information such as 'Each group status display', 'malfunction situation', and the 'model name of the malfunctioning unit'.
F
finleyrachelSep 2, 2025
What does it mean if the “Each group status display” is red on Mitsubishi Heavy Industries SC-SL4-AE?
- S
  Stephanie HamiltonSep 2, 2025
  If the “Each group status display” is displayed in red on your Mitsubishi Heavy Industries Control Systems, it indicates a unit malfunction. Contact your dealer and provide the following information: 'Each group status display', 'malfunction situation', 'model name of the malfunctioning unit', and 'Error No. (E00)' etc.