To Next PageTo Next PageWhat does it mean if the “Each group status display” is yellow on Mitsubishi Heavy Industries SC-SL4-AE Control Systems?
If the “Each group status display” is displayed in yellow on your Mitsubishi Heavy Industries Control Systems, it indicates a communication problem. Contact your dealer, and be ready to provide information such as 'Each group status display', 'malfunction situation', and the 'model name of the malfunctioning unit'.
What to do if scheduled operation does not work on Mitsubishi Heavy Industries Remote Control?
If the scheduled operation isn't working, verify that the schedule settings, including both Today's schedule and the detailed daily schedule, are configured correctly.
What does it mean if the “Each group status display” is red on Mitsubishi Heavy Industries SC-SL4-AE?
If the “Each group status display” is displayed in red on your Mitsubishi Heavy Industries Control Systems, it indicates a unit malfunction. Contact your dealer and provide the following information: 'Each group status display', 'malfunction situation', 'model name of the malfunctioning unit', and 'Error No. (E00)' etc.
What to do if the screen of Mitsubishi Heavy Industries SC-SL4-AE Control Systems does not change when touched?
If the screen of your Mitsubishi Heavy Industries Control Systems does not respond to touch, it might be due to a malfunction caused by electrostatic discharge. Try turning the power off and then on again to reset it. If it still doesn't work, contact your dealer and describe the malfunction.
Why is my Mitsubishi Heavy Industries SC-SL4-AE air conditioner turning on by itself?
If your Mitsubishi Heavy Industries Control Systems air conditioner is operating on its own, you should check the schedule settings. Group settings may have been scheduled and can be changed as needed.
How to reset the filter sign on Mitsubishi Heavy Industries SC-SL4-AE Control Systems?
If the filter sign is lit on your Mitsubishi Heavy Industries Control Systems, it indicates that you should clean the air filter. Please refer to the air conditioner's manual for instructions on how to clean it. After cleaning, remember to press the filter reset button.
What to do if the screen is dark on my Mitsubishi Heavy Industries SC-SL4-AE Control Systems?
If the screen of your Mitsubishi Heavy Industries Control Systems doesn't display anything, it could be due to two reasons. First, the backlight might be off to save the screen; simply touch the screen to wake it up. Second, electrostatic discharge may have caused a malfunction. In this case, try turning the power off and then on again. If the problem persists, contact your dealer and provide details about the malfunction.
Why temperature settings (10 deg. C to 17.5 deg. C and 30.5 deg. C to 35 deg. C) cannot be changed on Mitsubishi Heavy Industries Remote Control?
Some air conditioner models may not allow changes to these temperature settings. Contact your dealer for advice.
What to do if on-screen operation goes smoothly, but the actual Mitsubishi Heavy Industries Remote Control air conditioner does not operate?
If the on-screen operation appears normal but the air conditioner isn't responding, check whether you are operating in virtual mode. Also, verify the setting in the SL4 central control.
Why does Mitsubishi Heavy Industries Remote Control monitoring PC freeze every few months?
If the monitoring PC freezes every few months, restart Internet Explorer regularly. Additionally, if you're using Windows Vista, ensure it's Service Pack 1 (SP1) or later. If it's an earlier version, upgrade to SP1 or later.
General| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | SC-SL4-AE |
| Category | Control Systems |
| Language | English |
