To Next PageTo Next PageWhy do I hear a cracking sound from my Mitsubishi Heavy Industries SRC25ZMP-S Air Conditioner?
If you hear a slight cracking sound from your Mitsubishi Heavy Industries Air Conditioner, it's due to heat expansion or contraction.
Why do I hear a gurgling sound from my Mitsubishi Heavy Industries SRC25ZMP-S?
If you hear a slight gurgling sound from your Mitsubishi Heavy Industries Air Conditioner, it's caused by refrigerating liquid moving within the unit.
Why does my Mitsubishi Heavy Industries Air Conditioner have a slight smell?
If you notice a slight smell from your Mitsubishi Heavy Industries Air Conditioner, it may be caused by tobacco or cosmetics adhering to the unit. The air blown out during operation may carry this smell.
Why does my Mitsubishi Heavy Industries Air Conditioner release steam during COOL operation?
If you notice some steam escaping during COOL operation of your Mitsubishi Heavy Industries Air Conditioner, this can occur when the room's temperature and humidity are very high. It should disappear as the temperature and humidity decrease.
Why is there no airflow when starting the DRY operation on my Mitsubishi Heavy Industries SRC25ZMP-S?
If airflow is not blown out when starting the DRY operation on your Mitsubishi Heavy Industries Air Conditioner, but the RUN light is on, the indoor fan may stop to prevent re-evaporation of dehumidified moisture and to save energy.
How to fix Mitsubishi Heavy Industries SRC25ZMP-S Air Conditioner remote control not working?
If remote control signals are not received by your Mitsubishi Heavy Industries Air Conditioner, it may be because the signal receiver on the air-conditioner is exposed to direct sunlight or other bright light. If so, cut out the sunlight or reduce the other light.
What to do if my Mitsubishi Heavy Industries SRC25ZMP-S airflow is not blown out when starting the HEATING operation?
If your Mitsubishi Heavy Industries Air Conditioner isn't blowing air when starting the HEATING operation, but the RUN light blinks slowly (1.5 sec ON, 0.5 sec OFF), it's because the airflow is stopped to prevent cold air from blowing out until the indoor heat exchanger warms up. This may take 2 to 5 minutes due to the HOT KEEP program.
Why doesn't my Mitsubishi Heavy Industries Air Conditioner restart immediately after I turn it off?
If your Mitsubishi Heavy Industries Air Conditioner doesn't restart immediately after being stopped but the RUN light is on, it's because the restart function is blocked for 3 minutes to protect the unit. The microcomputer's three-minute protection timer will automatically restart it.
Why does my Mitsubishi Heavy Industries Air Conditioner sometimes not blow warm air during heating?
If the outdoor temperature is low and humidity is high, your Mitsubishi Heavy Industries Air Conditioner may automatically perform defrosting. Please wait.
Why is there no airflow when I start the heating on my Mitsubishi Heavy Industries Air Conditioner?
When starting the heating operation, your Mitsubishi Heavy Industries Air Conditioner may temporarily stop airflow to prevent cold air from blowing out until the indoor heat exchanger warms up. Please wait for 2 to 5 minutes.
General| Brand | Mitsubishi Heavy Industries |
|---|---|
| Model | SRC25ZMP-S |
| Category | Air Conditioner |
| Language | English |
