To Next PageTo Next PageWhat to do if my Mitsubishi Heavy Industries SRC35ZS-W2 Air Conditioner is not cooling properly?
Several factors might be affecting the cooling performance of your Mitsubishi Heavy Industries Air Conditioner. Check if direct sunlight is entering the room. Identify and eliminate any heat sources present in the room. Consider whether the number of people in the room is affecting the unit's ability to cool effectively.
Why is my Mitsubishi Heavy Industries SRC35ZS-W2 Air Conditioner not cooling well?
There could be several reasons why your Mitsubishi Heavy Industries Air Conditioner isn't cooling effectively. Ensure that the thermostat is set to a suitably cool temperature. Check if the air filter is clean and not clogged. Also, make sure all doors and windows are closed to prevent warm air from entering the room.
How to fix a Mitsubishi Heavy Industries SRC35ZS-W2 that doesn't work?
If your Mitsubishi Heavy Industries Air Conditioner isn't working at all, check the following: - Ensure that the power switch is turned on. - Verify that the timer hasn't been set to the 'ON' position. - Check for a power failure or a blown fuse.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Type | Split System |
| Noise Level (Indoor Unit) | 21 dB |
Safety measures for installing the air-conditioner, covering gas, water, and electrical safety.
Essential safety guidelines for operating the air-conditioner, including user conduct and appliance handling.
Safety warnings and procedures for moving or repairing the air-conditioner unit.
Details the various parts and their functions of the indoor unit.
Details the various parts and their functions of the outdoor unit.
Explains the display and buttons on the unit itself.
Lists and describes the included accessories for the air-conditioner.
Step-by-step guide for replacing batteries in the remote control.
Instructions on how to install and use the remote control holder.
Troubleshooting steps for when the remote control is not working.
How to operate the unit using the physical button when the remote is unavailable.
Configuration steps for the remote control when using two units.
Configuration steps for the indoor unit when using two units.
Specifies the operational temperature and humidity ranges for optimal performance.
Details the working principles and defrosting process of the HEAT mode.
Guide to adjusting the vertical (up/down) airflow direction.
Instructions for manually adjusting the horizontal (left/right) airflow direction.
How to enable or disable the weekly timer function for automated operation.
Procedure for setting individual timer programs for each day of the week.
Procedure for applying the same timer program to all days of the week.
Steps to remove specific timer programs from the weekly schedule.
Steps to remove all collective timer programs from the weekly schedule.
Function to review programmed weekly timer settings.
Cleans the indoor unit to prevent mold and odor by removing moisture.
Saves and recalls preferred operating modes, temperature, and fan settings.
Automatic adjustment of air outlet direction based on cooling, dry, or heat modes.
Instructions for accessing and handling the air inlet panel for maintenance.
Step-by-step guide on how to clean the air filters regularly.
Procedures for handling specialized air filters, including cleaning and replacement.
