Need help?Do you have a question about the Mitsubishi Heavy Industries SRC35ZFX-S and is the answer not in the manual?
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Power Supply | 220-240 V, 50 Hz |
| Indoor Unit Dimensions (W x H x D) | 845 x 270 x 228 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 290 mm |
| Refrigerant | R32 |
| Type | Split System |
| Energy Efficiency Rating (Cooling) | A++ |
| Operating Temperature (Heating) | -15 to +24 °C |
| Noise Level (Indoor Unit) | 21 dB (Low) |
| Noise Level (Outdoor Unit) | 49 dB(A) |
Lists technical specifications for SRK20ZFX-S (Indoor) and SRC20ZFX-S (Outdoor).
Provides charts for correcting capacity based on temperatures and piping length.
Explains remote control buttons, indicators, and their functions.
Explains component operation, airflow, and specific modes in heating operation.
Details hot keep and high power operations during heating.
Describes component operations and airflow selection in cooling mode.
Details frost prevention for indoor heat exchanger and indoor fan motor protection.
Covers heating/cooling overload, low load, and compressor overheat protection.
Details freezing cycle protection, serial signal error protection, and compressor overheat.
Covers high pressure control and heating low outdoor temperature protection.
Details cooling low outdoor temperature protective control for various conditions.
Details cooling low outdoor temperature protective control for various conditions.
Provides critical safety warnings and precautions for installation and operation.
Provides step-by-step troubleshooting procedures for electrical equipment issues.
Lists error codes, causes, and display conditions for self-diagnosis.
Explains how to access service mode and interpret recorded error/stop data.
Details how to interpret self-diagnosis data using remote control settings.
Provides inspection procedures for sensor errors and current cut faults.
Details troubleshooting for compressor overheat and signal transmission errors.
Provides troubleshooting steps for outdoor unit problems and fan motor errors.
Details troubleshooting for rotor lock and sensor wire breakage issues.
To Next Page
