To Next PageTo Next PageWhat to do if my Mitsubishi Heavy Industries Air Conditioner does not work?
If your Mitsubishi Heavy Industries Air Conditioner isn't working, check if the power switch is turned on, if the timer is set in the “ON” position, and if there is a power failure or a blown fuse.
How to fix a Mitsubishi Heavy Industries SRF35ZJX-S Air Conditioner when remote control signals are not received?
If remote control signals are not received by your Mitsubishi Heavy Industries Air Conditioner, it may be because the signal receiver is exposed to direct sunlight or other bright light. If so, cut out the sunlight or reduce the other light.
What to do if Mitsubishi Heavy Industries SRF35ZJX-S Air Conditioner is not cooling enough?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling adequately, check if direct sunlight is entering the room. Also, identify and eliminate any heat sources present, and consider if there are too many occupants in the room.
How to restart Mitsubishi Heavy Industries Air Conditioner after power outage?
If, after a power cut, your Mitsubishi Heavy Industries Air Conditioner doesn't restart even after power is restored, use the remote control to start the operation again.
Why does my Mitsubishi Heavy Industries SRF35ZJX-S Air Conditioner make a hissing or clicking sound?
If you hear a hissing or clicking sound from your Mitsubishi Heavy Industries Air Conditioner, this is caused by the operation of the refrigerant control valves or electric components.
What causes a cracking sound in my Mitsubishi Heavy Industries SRF35ZJX-S Air Conditioner?
If you hear a slight cracking sound from your Mitsubishi Heavy Industries Air Conditioner, this is caused by heat expansion or contraction.
Why does my Mitsubishi Heavy Industries Air Conditioner make a gurgling sound?
If you hear a slight gurgling sound from your Mitsubishi Heavy Industries Air Conditioner, this is caused by refrigerating liquid moving within the unit.
Why is my Mitsubishi Heavy Industries Air Conditioner not cooling or heating properly?
If your Mitsubishi Heavy Industries Air Conditioner isn't cooling or heating well, first, adjust the thermostat to a more suitable temperature. Also, check to ensure the air filter is clean and that all doors and windows are closed.
Why does the RUN light stay on after stopping my Mitsubishi Heavy Industries SRF35ZJX-S?
If the RUN light stays on even though operation was stopped on your Mitsubishi Heavy Industries Air Conditioner, the RUN light illuminates during CLEAN operation and turns off when CLEAN operation ends.
Why is there moisture on the Mitsubishi Heavy Industries SRF35ZJX-S outlet grills?
If moisture forms on the air outlet grills of your Mitsubishi Heavy Industries Air Conditioner, it may be because the unit is operated for a long time in high humidity, causing moisture to form and start dripping.
General| Cooling Capacity | 3.5 kW |
|---|---|
| Heating Capacity | 4.0 kW |
| Indoor Unit Dimensions (W x H x D) | 845 x 275 x 228 mm |
| Outdoor Unit Dimensions (W x H x D) | 780 x 540 x 269 mm |
| Refrigerant | R32 |
| Energy Efficiency Ratio (EER) | 3.50 |
| Power Supply | 220-240V, 50Hz |
| Energy Efficiency Ratio (Cooling) | 3.50 |
