– 12 –
AUTO HiMeLoULo
Temperature adjustment during AUTO
■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the button or
the button.During automatic operation, 24°C is preset both for heating and cooling.
1
Press the“ or (TEMP)” button.
■ Each time the button is pressed, the switch over occurs in the following order
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the button is pressed, the indicator does not change.
■ Each time the button is pressed, the switch over occurs in the following order
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the button is pressed, the indicator does not change.
When it is a little cold
Press the
button.
When it is a little hot
Press the
button.
FAN SPEED
■ You can choose the fan speed of your air-conditioner without dry mode.
Remote Control display
-6 -5 -4 -3 -2 -1
+
0 +1 +2 +3 +4 +5 +6
18 19 20 21 22 23 24 25 26 27 28 29 30
Setting
temp.(°
C
)
Press the FAN SPEED button.
Each time the button is pressed, the fan speed changes.
1
• When FAN SPEED is changed from Hi to Lo or ULo, the sound of
refrigerant fl owing may be heard.
NOTE
Operation capacity by your choice FAN SPEED
Set automatically by microcomputer AUTO
Silent operation ULo
Energy-saving operation Lo
Standard operation Me
Powerful operation with high capacity Hi
Airfl ow direction adjustment
Adjusting up/down air fl ow direction
■ Air fl ow direction adjustment can not be performed, although a display will be
changed if “AIR FLOW” button is pushed.
RJJ012A001EN.indd12RJJ012A001EN.indd12 2015/02/2010:16:242015/02/2010:16:24
To Next Page
Loading...
Need help?
General
