11-5
1. Place the chains over the tires with the hook
ends of cross chains facing outward.
2. Connect the hook of inside chain , leaving
no excess links. Then, take up the slack in the
inside chain by pulling cross chains for the
inside tire outward.
NOTE:
Pull the hook section outward to the possible maxi-
mum extent.
3. Temporarily connect hook of outside chain
as shown.
4. Pull the middle chain as far as possible and
connect its hook.
5. Pull both ends of outside chain as far as pos-
sible and connect hook .
Z09325
Z09326
Z11190
Z11191
FE_FG.book Page 5 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
