12-34 Simple inspection and service
Recommended oil:
Gear oil
API classification GL-5
Below 40°C (104°F) SAE90
40°C (104°F) or higher SAE140 or 85W-140
CAUTION
• Use oil conforming to GL-5, SAE140 or
SAE85W-140 if the vehicle is to be driven
under heavy load conditions as for example
driving up long uphill grades. Remember,
however, that this oil is to be used only when
the temperature is higher than 10°C (50°F).
• On vehicles with a limited slip differential, fill
the differential with Genuine Gear Oil, Part
No. 8149630EX (GL-5, SAE90).
Quantity required:
These oil quantities are given only as guidelines. Be
sure to check the correct oil level by removing the
inspection plug as indicated below.
5.1 Check
1. Remove inspection plug .
Model Quantity
FE Approx. 4.5 liters (4.8 qts)
FG
Front axle Approx. 3.0 liters (3.2 qts)
Rear axle Approx. 4.5 liters (4.8 qts)
WARNING
Do not check the oil level immediately after
driving, as you could be scalded by
extremely hot oil.
Give the oil time to cool before performing
the inspection.
Z09245
FE_FG.book Page 34 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
