4-3
1.2 Making adjustments
• Slide seat forward or backward while holding
slide adjustment lever raised. After making
the adjustment, release the lever and move the
seat back and forth slightly to lock it in position.
• To adjust the angle of the seatback , raise
reclining lever .
• Lower the armrest to use it. Turn the armrest
knob to adjust the height of the armrest in its
lowered position.
Up
Down
2 Assistant driver’s seat
Assistant driver’s seat
Center seat
It is possible to tip the seatback fully forward. With
the lever pulled, grasp the seatback at the top
and tip it forward.
After returning the seatback to its original position,
gently rock it to make sure it is locked in place.
Z10741
Z18529
FE_FG.book Page 3 Wednesday, January 14, 2009 7:08 PM