4-6 Seat and steering wheel adjustments
1 Lap and shoulder belts with ELR
NOTE:
It is not necessary to adjust the length of these seat
belts.
An ELR seat belt extends and retracts automatically
as its wearer moves but locks automatically for pro-
tection in the event of a sudden stop or shock.
The belt’s tightness should be adjusted automati-
cally. If there is any looseness, lift the shoulder belt
gently and the mechanism will take up the slack.
With the belt properly tightened, the risk of it slip-
ping off in a collision is reduced.
• Fastening
1. Hold tang and gently extend the belt. If the
belt locks or is difficult to extend, let it retract and
pull it gently again.
2. Take care that the belt does not become twisted.
Insert the tang into the buckle until you hear a
click.
3. Pull on the tang to confirm that it is locked in.
4. Adjust the belt so it is across your hips and
shoulder.
• Unfastening
1. Press the red button to unlock the buckle.
2. The belt automatically retracts when unlocked.
To prevent the tang causing damage or injury,
hold it while the belt retracts.
3. Adjust the tang stopper to locate the tang in
an easy-to-reach position and prevent it from
slipping.
Z10760
Z11726
Z01351
FE_FG.book Page 6 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
