5-7
2. Check whether the indicator lamp illumi-
nates or not.
• When the indicator lamp does not illumi-
nate
Automatic transmission vehicles: While holding
down the brake pedal, turn the starter switch to
the “START” position to start the engine.
Manual transmission vehicles: While holding
down the clutch pedal , turn the starter switch
to the “START” position to start the engine.
• When the indicator lamp illuminates
Wait until the indicator lamp goes out;
Automatic transmission vehicles: While holding
down the brake pedal, turn the starter switch to
the “START” position to start the engine.
Manual transmission vehicles: While holding
down the clutch pedal , turn the starter switch
to the “START” position to start the engine.
NOTE:
<FE84, FE85, FG>
If the engine is difficult to start after the indicator
lamp has gone out, the fuse of the preheating circuit
may be blown out. Check the fuse if this happens.
P. 1 3 - 1 6
<FE83>
If the engine is difficult to start and the lamp is
illuminated, the preheating circuit is faulty.
Have the circuit repaired by the nearest authorized
dealer.
Z08914
Z08915
Z08915
FE_FG.book Page 7 Wednesday, January 14, 2009 7:08 PM
To Next Page
Loading...
Need help?
General
