6-14
For emergencies
6
5. Remove the wheel nuts with the wheel nut wrench, then
take the wheel off.
6. Clean out any mud, etc. on the hub surface (F), hub bolts
(G) or in the installation holes (H) in the wheel, and then
mount the spare tire.
● No one should be in your vehicle when using the
jack.
● Do not start or run the engine while your vehicle is
on the jack.
● Do not turn the raised wheel. The tires that are still
on the ground could turn and make your vehicle fall
off the jack.
CAUTION
!
● Handle the wheel carefully when changing the tire,
to avoid scratching the wheel surface.
WARNING
!
BK0120400US.book 14 ページ ２０１０年５月１２日 水曜日 午前１０時５０分
To Next Page
Loading...
Need help?
General
