Multi-information display
Features and controls 5-87
5
N00555500042
Shows the distance and number of months
until the next periodic inspection.
Refer to “Service reminder” on page 5-96.
N00559600201
When there is information to be announced,
such as a key reminder, the buzzer sounds and
switches to the warning display screen. Refer
to the appropriate page and take the necessary
measures.
When the cause of the warning display is
eliminated, the warning display goes out
automatically.
Refer to “Warning display list (With ignition
switch or operation mode in OFF)” on page
5-107.
Even if the cause of the warning display is
not eliminated, you can return to the screen
that was displayed before the warning dis-
play.
If you press the multi-information meter
switch, the display screen switches to the
screen display from before the warning and
the warning (A) is displayed.
When the warning is displayed, if you
lightly press the multi-information meter
If there is no warning display, the switching
sequence is: odometer/trip odometer
odometer/trip odometer service
reminder odometer/trip odometer .
Both trip odometers and can count
up to 9999.9 miles/kilometers.
When a trip odometer goes past 9999.9
miles/kilometers, it returns to 0.0 miles/kilo-
meters.
When disconnecting the battery terminal, the
memories of trip odometer displays and
are cleared, and their displays return to
“0.0 miles/kilometers”.
Service reminder
Interrupt display screen (With
ignition switch or operation
mode in OFF)
1- Information generated
2- Cause eliminated
Returning to the display screen
from before the warning display
Warning display screens with a “ ” or
“ ” mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information
meter switch as follows.
“ ”: Press lightly.
“ ”: Press for about 2 seconds or more.
Redisplay of a warning display screen
To Next Page
Loading...
