Multi-information display
5-88 Features and controls
5
switch a few times, the warning display
screen you switched from is redisplayed.
Refer to “Information screen (With ignition
switch or operation mode in OFF)” on page
5-85.
N00559700156
If any of the doors or the liftgate is not com-
pletely closed, this displays the open door or
liftgate.
N00555800191
When the ignition switch is turned to the
“ON” position or the operation mode changed
to ON, the display screen switches in the fol-
lowing order.
When the ignition switch is turned to the
“ON” position or the operation mode is
changed to ON, the system check screen is
displayed for about 4 seconds. If there in no
fault, the information screen is displayed.
If there is a fault, the screen changes to warn-
ing display.
Refer to “Warning display list (With ignition
switch or operation mode in ON)” on page
5-109.
Door ajar warning display
screen (With ignition switch or
operation mode in OFF)
1- Doors and liftgate are closed
2- Doors or liftgate is open
Information screen (With the
ignition switch is turned from
the “OFF” position to the “ON”
position or the operation mode
is changed from OFF to ON)
1- Screen when the ignition switch or oper-
ation mode is OFF)
2- System check screen
3- Screen when the ignition switch or oper-
ation mode is ON)
To Next Page
Loading...
