Multi-information display
Features and controls 5-97
5
1. When you lightly press the multi-informa-
tion meter switch, the information screen
switches to the service reminder display
screen.
2. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to display “ ” and make it flash.
(If there is no operation for about 10 sec-
onds with this indicator flashing, the dis-
play returns to the previous screen.)
3. With this indicator flashing, if you lightly
press the multi-information meter switch,
the screen switches from “---” to
“CLEAR”. After that, the time until the
next periodic inspection is shown.
N00555700132
Type 1
Type 2
The customer is responsible for making sure
that regular inspections and maintenance and
periodic inspections and maintenance are
performed.
Inspections and maintenance must be per-
formed to prevent accidents and malfunc-
tions.
The “---” display cannot be reset while the
ignition switch or the operation mode is in
ON.
When “---” is displayed, after a certain dis-
tance and a certain period of time, the dis-
play is reset and the time until the next
periodic inspection is displayed.
If you accidentally reset the display, consult
an authorized Mitsubishi Motors dealer for
assistance.
Door ajar warning display
screen (With ignition switch or
operation mode is in ON)
BK0206700US.book 97 ページ ２０１４年３月２５日 火曜日 午後４時４２分
To Next Page
Loading...
