Multi-information display
5-98 Features and controls
5
If any of the doors or the liftgate is not com-
pletely closed, this displays the open door or
liftgate.
If the speed increases to about 5 mph (8
km/h) or higher with a door ajar, a tone will
sound 4 times to inform you that a door is
ajar.
N00556801212
1. Park your vehicle in a safe place.
Fully apply the parking brake and move
the gearshift lever into the “N” (Neutral)
position (Manual transaxle) or the selector
lever into the “P” (PARK) position
(CVT).
2. When you lightly press the multi-informa-
tion meter switch, the information screen
switches to the function setting screen.
Refer to “Information screen (With igni-
tion switch or operation mode in ON)” on
page 5-89.
3. Press and hold the multi-information
meter switch (for about 2 seconds or
more) to switch from the setting mode
screen to the menu screen.
Always make sure that the warning display
goes out before beginning to drive.
Changing the function settings
(With ignition switch or opera-
tion mode is in ON)
For safety, stop the vehicle before operating.
While driving, even if you operate the multi-
information meter switch, the function set-
ting screen is not displayed.
To return the menu screen to the function set-
ting screen, press and hold the multi-infor-
mation meter switch (for about 2 seconds or
more).
If no operations are made within about 15
seconds of the menu screen being displayed,
the display returns to the function setting
screen.
To Next Page
Loading...
