9
You can deactivate the system by pressing
down the “ASC OFF” switch for 3 seconds
or longer. When the ASC is deactivated, the
display/indicator will turn on.
To reactivate the ASC, momentarily press the
“ASC OFF” switch; the display/indicator is
turned off.
When you press the LDW switch located on the
left side of the steering column, the “LDW”
indicator on the information screen of the
Multi-information Display turns OFF and the
LDW system is inactive.
Press the switch again, the system
will activate.
Every time the operation mode is turned to
“ON”, the FCM will automatically be
turned on.
To turn off the FCM, press and hold the FCM
switch located on the left side of the steering
column. The “FCM OFF” message and
indicator will appear in the Multi-information
Display.
To change the warning distance mode, briefly
press the FCM switch.
The Forward Collision Mitigation (FCM) system is a driver aid only and is not a
substitute for safe and careful driving. Under certain circumstances, the system
may not detect other vehicles and/or pedestrians correctly.
SWITCHES
ACTIVE STABILITY CONTROL (ASC) OFF SWITCH LANE DEPARTURE WARNING (LDW) SWITCH (IF EQUIPPED)
FORWARD COLLISION MITIGATION (FCM) SWITCH (IF EQUIPPED)
To Next Page
Loading...
Need help?
General
