13
OPERATIONS
F.A.S.T.-KEY FOB (IF EQUIPPED)
While carrying the F.A.S.T.-Key
fob, press the driver’s door
lock/unlock switch
.
IF THE F.A.S.T.-KEY FOB IS NOT OPERATING PROPERLY
1. Take the key
A
out to unlock the door
2. Press the break pedal and hold the F.A.S.T-Key fob
B
up to
the Start/Stop Engine Switch button.
3. Starting the engine should now be possible
F.A.S.T.-KEY FOB
OPERATION INDICATOR LIGHT
LOCK (
) BUTTON
UNLOCK (
) BUTTON
PANIC BUTTON
While carrying the F.A.S.T.-Key fob within the operating range, the
Start/Stop Engine Switch can be used to start the engine.
• To start engine, make sure the selector lever is in the (Park)
position and hold the brake pedal down. Push the Start/Stop
Engine Switch.
• To stop the engine, stop the vehicle completely and move the
selector lever to “P” then press the Start/Stop Engine Switch.
*If you have to bring the engine to an emergency stop while driving, press and
hold the Start/Stop Engine Switch for more than 3 seconds..
• If you press the Start/Stop Engine Switch without depressing the brake pedal,
you can change the operation mode in the order of OFF, ACC, ON, OFF. Please
make sure vehicle is completely stopped before changing the operation mode.
*If the engine cannot be started, depress the brake pedal more firmly than usual
with the right foot. Then press the Start/Stop Engine Switch.
• If the engine cannot be started or the operation mode cannot be changed,
check the position of the F.A.S.T.-Key fob or the battery performance of the
F.A.S.T.-Key fob.
SECOND ROW SEAT OPERATION
START/STOP ENGINE SWITCH (IF EQUIPPED WITH F.A.S.T.-KEY FOB)
TO ADJUST THE SEAT BACKS
Pull the seat adjusting lever up and slide the seat forward
or backward to the desired position. Release the adjusting
lever to lock the seat in place.
Pull the lever up and adjust the seatback by hand to the
desired position, and release the lever. The seatback will
lock in place.
B
A
To Next Page
Loading...
Need help?
General
