17
1. Park your vehicle in a safe place and
turn the ignition switch to the "OFF"
position or put the Operation Mode
in OFF.
2. Plug in the USB factory cable that is
supplied with your device and connect
the USB end into the input terminal
located below the Climate Controls.
3. Turn the ignition switch or the Operation Mode to the "ACC"
position. Turn on the audio system.
4. There are 2 ways to access your USB
- Go to Home Screen and scroll to USB, press button
- Click on Audio button by Touch Pad on the center console.
5. Depending on your USB device, it may take longer for playback
to start.
6. Once the device is selected, playback starts.
SMARTPHONE LINK THIN-DISPLAY AUDIO (SDA) (IF EQUIPPED)
Apple CarPlay, iPhone, Siri and Lightning are trademarks of Apple Inc., registered in the U.S. and other Countries. Android, Android Auto, Google Play and other marks are trademarks of Google Inc.
1. Make sure your iPhone
®
has iOS8.0 or later and
that you are using a genuine Apple Lightning
®
to USB cable.
2. Connect the Apple Lightning
®
to USB cable to
your phone and to the vehicle's USB port.
3. Apple CarPlay will automatically connect. To
use the iPhone with Apple CarPlay even while locked, choose "Allow" on your
iPhone's screen after the first connection.
4. You can operate Siri by pressing and holding the Steering Wheel Audio Speech
button until prompted on the screen.
ACCESSING APPLE CARPLAY
™
1. Make sure your phone has Android 5.0 or later.
2. You must download the Android Auto app from
the Google Play Store. This process may take
up to a couple of minutes.
3. Connect the manufacturer's phone cable from
your phone into the vehicle's USB port.
4. Follow your phone’s on-screen instructions until you are connected to Android
Auto. You can press the Speech button on the Steering Wheel Audio Controls
to activate voice operation.
ACCESSING ANDROID AUTO
™
AUDIO REMOTE CONTROL SWITCH
VOLUME UP
SEEK
Change station or track
VOLUME DOWN
MODE
Change the audio source
USB INPUT
Number of USB ports may differ