Mitsubishi A Series - Page 182

8. COMMUNICATIONS USING DEDICATED PROTOCOLS
MELSEC-A
8.7.6 Testing device memory In unita of bit (random me)
(a) Using the BT command (ACPU common command)
)eelgnation Method
I
St No. : Station number
Designation in protocol 1 is shown below.
POINTI
To designate the device range, the following condition must be met:
0 1 5 number of device points 4 20
)eslgnatlon Example I
To write ON to M50, OFF to B31A, and ON to Y2F in station y5".
(Message wait time is 0 msec)
Check sum is calcuiated within this range
8-40
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com