5 - 107
MELSEC-
5 DATA USED FOR POSITIONING CONTROL
Setting value Default value
Storage buffer
memory address
(common for axis 1 to
axis 3)
Set with a BCD code.
0 0 0 0 0 0 0 0 0 0 0 0 0 00
b15 b0b4b8b12
0 0 1 0
00 to 23 (hour)
0 to 2 0 to 9
0
Setting value
Buffer memory
No setting
0000 1100
Set with a BCD code.
0 0 0 0 0 0 0 0 0 0 0 0 0 00
b15 b0b4b8b12
0 0 0 0
00 to 59 (second)00 to 59 (minute)
0 to 5 0 to 90 to 5 0 to 9
0
Setting value
Buffer memor
0000 1101
Set with a hexadecimal.
0 0 0 1
0 0 0 0 0 0 0 0 0 0 0 0 0 01
b15 b0b4b8b12
0
Setting value
Buffer memory
Clock data wirte
1: Clock data
write request
Not set
When the clock data is written,
"0" is stored from the OS.
0000
H 1102
Set with a hexadecimal.
0 0 0
0 0 0 0 0 0 0 0 0 0 0
b15 b0b4b8b12
0
Setting value
Buffer memory
Target axis
Not set
1: Axis 1
2: Axis 2
3: Axis 3
4: Axis 1 and axis 2
interpolation
5: Axis 2 and axis 3
interpolation
6: Axis 3 and axis 1
interpolation
0000H 1103
Cd.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...