Mitsubishi AG-150A User Manual

3
(4) In the [Internet Protocol (TCP/IP) Properties] dialog, click [Use the
following IP address] and enter the IP address (for example,
“192.168.1.101”) that you want to set in the IP address field.
You normally set [255.255.255.0] as the subnet mask.
Note: Ask your LAN administrator to provide the IP addresses and subnet mask.
(5) Click the [OK] button to close this dialog, and then close the other open
dialogs to complete the network setting.

Mitsubishi AG-150A Specifications

General

Brand	Mitsubishi
Model	AG-150A
Category	Controller
Language	English