α2
Simple Application Controllers
Function Blocks 6
6 - 28
6 ) Or press the “ESC” key to return to the function block data input type menu, select the
Analog In selection and press the “OK” key
7 ) Or press the “ESC” key to return to the function block data input type menu, select the FB
Value selection and press the “OK” key.
8 ) Using either the “OK” key or the “ESC” key depending on the acceptance of the setting.
Press the “OK” key when the Condition is highlighted. Thus, selecting the correct compar-
ator from the range.
9 ) Having set the V1, condition and V2 simultaneously use the “ESC” key to return to the
function block edit screen.
B001 : CP
Cmp V a l
0
1
Ana l og I n
A01
B001 : CP
Cmp V a l 1
No t Ex i s t
Va l i d FB
B001 : CP
Con d i t
V1 = V2
ion
To Next Page
Loading...
