Mitsubishi ASX User Manual

Refer to “Warning display list (when the ignition
switch or the operation mode is OFF)” on page
3-27.
Type 1
Type 2
1- Information generated
2-
Cause eliminated
To return to the screen displayed before the warn-
ing display
Even if the cause of the warning display is not elim-
inated, you can return to the screen that was dis-
played before the warning display.
If you press the multi-information meter switch,
the
display screen switches to the screen that was
displayed before the warning display and the
mark (A) is displayed.
Type 1
Type 2
NOTE
l
Warning
display screens with a “
” or “ ”
mark displayed in the upper right of the
screen can be switched. If you want to switch
the display, press the multi-information me-
ter switch as follows.
“ ”: Press lightly.
“ ”: Press for about 2 seconds or more.
Redisplay of a warning display screen
When the mark is displayed, if you lightly press
the
multi-information meter switch a few times, the
warning display screen you switched from is dis-
played again.
Refer to “Information
screen (when the ignition
switch or the operation mode is OFF)” on page
3-05.
Door ajar warning display screen
(when the ignition switch or the opera-
tion mode is OFF)
E00520600473
If any of the doors or the tailgate is not completely
closed, this displays the open door or tailgate.
Type 1
Type 2
1- Doors and tailgate are closed
2-
Doors or tailgate are open
Instruments and controls
3-07
3

Mitsubishi ASX Specifications

General

Brand	Mitsubishi
Model	ASX
Category	Automobile
Language	English