l
Up
to 10 characters are shown in the display
at once. If the title is cut off in the middle,
press the PAGE button. The next characters
are displayed every time this button is pressed.
l
If no title is stored, “NO TITLE” is shown in
the display.
l
Characters that cannot be displayed are sub-
stituted by “ • ”.
To use the external audio input
function*
E00732200755
Auxiliary Audio connector (RCA)
A-
Left audio input connector (white)
B- Right audio input connector (red)
You can listen to commercially available audio
equipment, such as a portable audio system, from
your vehicle’s speakers, by connecting the audio
equipment to the audio input connectors, which are
external input connectors (pin jacks).
To activate the external audio input
mode
A- CD button
B-
AM/FM button
1. Use a commercially available audio cable to
connect the audio equipment to the internal
audio input connector.
2. Press the CD button for more than 2 seconds.
The display will show “AUX” and then the
external audio input mode will be activated.
3. To deactivate the external audio input mode,
press the AM/FM button or the CD button to
switch to another mode.
CAUTION
l
Do
not operate the connected audio equip-
ment while driving.
This could distract you and an accident
might occur.
For pleasant driving
5-32
5