changes as follows every time the CD button
is pressed.
CD mode → USB (iPod) mode → Blue-
tooth
®
mode
NOTE
l
For vehicles equipped with audio input RCA
terminals, pressing and holding the CD but-
ton for 2 seconds or more switches the sys-
tem to the AUX mode.
3.
Connect your Bluetooth
®
device.
Refer to “Connecting the Bluetooth® 2.0 in-
terface and Bluetooth® device” on page
5-46.
4. Playback starts automatically.
To stop the playback (if supported by the device)
E00762800040
To stop the playback, press the DISC DOWN button.
To restart the playback, press the DISC UP button.
To pause the playback (if supported by the device)
E00762900054
To pause the playback, press the DISC DOWN but-
ton.
To restart the playback, press the DISC UP button.
To select a track (if supported by the device)
E00763000052
Press the TRACK button to select the desired track
number.
Press
: The track number increases by
one.
Press
: The track number decreases by
one.
Press for a
long period
(approx. 2 sec-
onds or more)
: The track number increases
continuously while the button
is pressed.
Press for a
long period
(approx. 2 sec-
onds or more)
: The track number decreases
continuouslywhile the button
is pressed.
If the side of the button is pressed once while a
track
is playing, playback returns to the start of that
track.
NOTE
l
Every time the track selection button is press-
ed, the track number in the display changes.
To play the same track repeatedly (if supported by
the device)
E00763100053
Press the RPT button during playback to show
“RPT” in the display.
To exit this mode, press the button again.
To play tracks in random order (if supported by
the device)
E00763200054
Press the RDM button to show “RDM” in the dis-
play.
The
system randomly selects and plays tracks from
all tracks in the Bluetooth
®
device.
To exit this mode, press the button again.
To find the start of each track for playback (if sup-
ported by the device)
E00763300042
Press
the SCAN button. “SCAN” is shown in the
display and all tracks in the Bluetooth
®
device are
played for approximately 10 seconds from the be-
ginning.
To exit this mode, press the button again.
To switch the display (if supported by the device)
E00763400056
The system can display tag information.
1. Press
and hold the DISP button until you
hear a beep to show “TAG” in the display.
2. The display changes as follows every time
the DISP button is pressed briefly:
Album title → Title name → Artist name →
Genre → Normal display
To Next Page
Loading...
Need help?
General
