EasyManuals Logo

Mitsubishi ASX User Manual

Mitsubishi ASX
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #194 background imageLoading...
Page #194 background image
NOTE
l
The
combination of items shown on the dis-
play varies depending on the vehicle model.
CAUTION
l
When display/indicator blinks, ASC is
operating,
which means that the road is
slippery or that your vehicle’s wheels are
beginning to slip. If this happens, drive
slower with less accelerator input.
l
If the temperature in the braking system
continues to increase due to continuous
brake control on a slippery road surface,
the
display/indicator will blink. To pre-
vent
the brake system from overheating,
the brake control of the traction control
function will be temporarily suspended.
The engine control of the traction control
function and normal brake operation will
not be affected. Park your vehicle in a
safe place. When the temperature in the
braking system has come down, the
dis-
play/indicator
will be turned off and the
traction control function will start operat-
ing again.
NOTE
l
The
display/indicator may turn on when
you
start the engine. This means that the bat-
tery voltage momentarily dropped when the
engine was started. It does not indicate a mal-
function, provided that the display goes out
immediately.
l
When
a compact spare tyre has been put on
your vehicle, the gripping ability of the tyre
will be lower, making it more likely that the
display/indicator will blink.
ASC warning display
E00619400443
If an abnormal condition occurs in the system, the
following display/indicator will turn on.
-
ASC indicator
-
ASC OFF display/ASC OFF indica-
tor
Warning display type 1
Warning display type 2
NOTE
l
The
combination of items shown on the dis-
play varies depending on the vehicle model.
CAUTION
l
The system may be malfunctioning.
Park your vehicle in a safe place and stop
the engine.
Restart the engine and check whether the
display/indicator goes out. If they go out,
there is no abnormal condition. If they do
not go out or appear frequently, it is not
necessary to stop the vehicle immediately,
but we recommend you to have your vehi-
cle inspected.
Towing
E00624400050
CAUTION
l
When towing the vehicle with only the
front wheels or only the rear wheels
raised off the ground, do not place the ig-
nition switch in the “ON” position or do
not put the operation mode in ON. Plac-
ing the ignition switch in the “ON” posi-
tion or putting the operation mode in ON
could cause the ASC to operate, resulting
in an accident.
Note that the correct towing method de-
pends on the transmission type and the ve-
hicle’s drive configuration.
For details, refer to “Towing” on page
6-19.
Starting and driving
4-42
4

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mitsubishi ASX and is the answer not in the manual?

Mitsubishi ASX Specifications

General IconGeneral
BrandMitsubishi
ModelASX
CategoryAutomobile
LanguageEnglish

Related product manuals