changing channels automati-
cally
To change channels:
O Press one of the channel controls
(CH, CBk_NNEL) on the control
panel or on the remote control.
The TV automatically goes to the
next memorized channel.
_>Important: The channel controls (CHANNEL) will work only after channels
have been programmed into meraory. (See "Memorizing channels,"
page 58.)
changing channels directly
To move directly to a particular
channel without going through the
programmed channels:
Use the remote control to select
the number of the channel you
want to view.
Press the ENTER button.
Getting Started 53
To Next Page
Loading...
