OTE
● When you insert the locking pins (D) into the holes (G),
they may be stiff. If this happens, adjust each locking pin
(D) to a length that enables secure retention of the wind
deflector. To adjust the length of each locking pin (D),
turn the end of the locking pin using a screwdriver.
6. Raise the top frame to the full upright position as illus-
trated.
BK0115900US.book 42 ページ ２００９年１０月２７日 火曜日 午後１２時１分
To Next Page
Loading...
