Features and controls
3-41
3
4. From inside the vehicle, insert the two retainer pegs (E)
all the way into mountings provided (F).
5. Align the locking pins (D) with the holes (G) in the vehi-
cle. Slide the locking pins (D) toward the outside and
insert them in the holes to retain the wind deflector. Make
sure that the wind deflector is securely installed in the
vehicle.
E
F
D
G
BK0115900US.book 41 ページ ２００９年１０月２７日 火曜日 午後１２時１分
To Next Page
Loading...
