Mitsubishi Engine cooling - <4 D6> Removal and Installation

ENGINE COOLING -
Water Hose and Water Pipe
14-21
<4D6>
Pre-removal operation
D Engine Coolant Draining (Refer to P.14-10.)
D Air Cleaner and Air Intake Hose Assembly Removal
Post-installation Operation
D Engine Coolant Supplying (Refer to P.14-10.)
D Engine Oil Supplying and Checking (Refer to
GROUP 11 - On-vehicle Service.)
D Air Cleaner and Air Intake hose Assembly
Installation
45 Nm
12 - 15 Nm
10 - 12 Nm
12 - 15 Nm
20 - 25 Nm
1
2
3
4
5
6
7
8
9
10
11
12
13
10 - 13 Nm
12 - 15 Nm
12 - 15 Nm
10 - 12 Nm
6Nm
17 Nm
9Nm
17 Nm
6Nm
7
Removal steps
1. Air hose and air pipe assembly
A
A
""
C
A
2. Radiator upper hose connection
A
A
""
C
A
3. Radiator lower hose connection
4. Heater hose connection
5. Turbocharger heat protector
6. Oil return hose and pipe assembly
7. Vacuum hose connection
8. Air pipe bracket stay
9. Oil pipe assembly
10. Oil pipe assembly
11. Vacuum pump assembly
12. Control wiring harness mounting
bolt
13. Fuel pipe mounting bolt