ENGINE COOLING -
Radiator
14-25
REMOVAL SERVICE POINTS
A
A
"
RADIATOR UPPER HOSE/RADIATOR LOWER
HOSE DISCONNECTION
After making mating marks on the radiator hose and the hose
clamp, disconnect the radiator hose.
A
B
"
TRANSMISSION FLUID COOLER HOSE AND PIPE
ASSEMBLY REMOVAL
After disconnecting the hoses from t h e radiator a n d th e
transmission, plug all of the pipes an d hoses to prevent dirt
and other foreign objects from getting inside.
INSTALLATION SERVICE POINT
"
A
A
RADIATOR LOWER HOSE/RADIATOR UPPER HOSE
CONNECTION
1. Insert each hose as far as the projection of the water
inlet fitting.
2. Align the mating marks on the radiator hose a n d hose
clamp, and then connect the radiator hose.
To Next Page
Loading...
