Mitsubishi FDC121KXZEN1-W - 12.2 Motion sensor kit

-
319
-
'20 • KX-T-373
PJF000Z730
'20 • PAC-T-352
-
27
-
(1) Specification
6. MOTION SENSOR KIT
FDT series(LB-T-5BW-E, LB-T-5BB-E)
Refrigerant pipe Drain pipe
Do not install the motion sensor kit at the following
places in order to avoid malfunction.
Installation of motion sensor kit
(1) Places exposed to direct sunlight
(2) Places near heat devices
(3) High humidity places
(4) Hot surface or cold surface
enough to generate condensation
(5) Places exposed to oil mist or steam directly
(6) Places affected by the direct airflow of the
indoor unit
(7) Places where the motion sensor is influenced
by the fluorescent lamp or sunlight
(8) Places where the motion sensor is affected by
infrared rays of any other communication devices
(9) Places where some object may obstruct the
motion sensor
Standard detectable area
Note
(1)Motion sensor must be installed
to the position as shown.
Installation position of motion sensor kit
Motion
sensor
205
Motion sensor kit
205
Unit:mm
PJF000Z730
12.2 Motion sensor kit
(1) FDT series(LB-T-5BW-E, LB-T-5BB-E)
(a) Specification