Mitsubishi FR-S520-0.1K to 3.7K(-R)(-C) User Manual

S
500
TRANSISTORIZED INVERTER
Thank you for choosing this Mitsubishi Transistorized inverter.
If this is the first time for you to use the FR-S500 series, please read through
this instruction manual (basic) carefully and use the inverter safely.
If you are going to use the inverter for higher-level applications, the FR-S500
instruction manual (detailed) [IB(NA)-0600027] is separately available from
where you purchased the inverter or your Mitsubishi sales representative.
INSTRUCTION MANUAL (BASIC)
FR-
FR-S520-0.1K to 3.7K(-R)(-C)
FR-S520-0.1K to 3.7K-NA(R)
FR-S520S-0.1K to 1.5K(-R)
FR-S520S-0.2K to 1.5K-EC(R)
CONTENTS
1. CONNECTION OF PERIPHERAL DEVICES......................................2
2. INSTALLATION METHOD ..................................................................4
3. SPECIFICATIONS OF WIRING AND TERMINALS ............................5
4. OPERATION/CONTROL...................................................................15
5. ADJUSTMENT OF THE FREQUENCY SETTING
POTENTIOMETER AND INDICATOR ..............................................21
6. FUNCTION LIST ...............................................................................25
7. ERRORS AND PROTECTIVE FUNCTIONS.....................................37
8. SPECIFICATIONS.............................................................................40
9. OUTLINE DRAWINGS ......................................................................44
Appendix 1 Instructions for Compliance with the European
Standards...........................................................................46
Appendix 2 Instructions for compliance with U.S. and Canadian
Electrical Codes..................................................................48

Mitsubishi FR-S520-0.1K to 3.7K(-R)(-C) Specifications

General

Brand	Mitsubishi
Model	FR-S520-0.1K to 3.7K(-R)(-C)
Category	Inverter
Language	English

Summary

Safety and Precautions

General Safety Matters

Covers electric shock, fire, and injury prevention, plus transportation and installation advice.

Wiring and Operation Safety

Additional safety points for wiring, trial runs, emergency stops, and general operation.

Japanese Power Supply Harmonic Suppression Guideline

Product Checking and Parts Identification

Guide to verifying the inverter upon unpacking and identifying its main parts and plates.

Connection and Wiring

Peripheral Device Connection and Basic Configuration

Details on connecting peripheral devices and the basic system configuration.

Terminal Connection Diagrams

Wiring diagrams for main and control circuits across different regional versions.

Main and Control Circuit Terminal Explanations

Explanation and wiring of main circuit and control circuit terminals.

RS-485 Communication Connection

Instructions for connecting to the RS-485 connector for communication.

Installation Method

Inverter Installation Conditions

Specifies environmental conditions and mounting requirements for safe inverter installation.

Prohibited Installation Conditions

Lists conditions to avoid during installation to prevent faults or failures.

Operation and Control

Control Panel and Basic Operation

Overview of the control panel and step-by-step guide for basic inverter operation.

Setting Frequency and Parameters

Instructions for setting operating frequency and changing various inverter parameters.

Parameter Clearing and Output Monitoring

Procedures for clearing parameters and monitoring the output current.

Parameter Adjustment and Functions

Frequency Setting Adjustment

Details on adjusting frequency settings using potentiometers, indicators, and calibration.

Function List and Parameter Explanations

Lists basic and extended function parameters with their settings and explanations.

Errors, Protective Functions, and Reset

Error Definitions and Minor Failures

Explains various error codes, minor failures, and warning indicators.

Write Errors and Inverter Reset

Details on write errors and procedures for resetting the inverter.

Specifications and Ratings

Inverter Ratings

Technical ratings including power supply, motor capacity, and electrical specifications.

Common Specifications

General specifications for control methods, signals, and protection functions.

Outline Drawings

Model Dimensions

Physical dimensions and mounting information for different inverter models.

Compliance Information

European Standards Compliance

Information regarding EMC and Low Voltage Directive compliance.

North American Electrical Codes Compliance

Guidelines for installation according to U.S. and Canadian electrical codes.

Motor Overload Protection

Instructions for setting up motor overload protection using parameter 9.